NovaStar MX_2xDP1.4 (8K@30Hz) Input Card COEX controller — front view
NovaStar MX_2xDP1.4 (8K@30Hz) Input Card COEX controller — rear I/O view
NovaStar MX_2xDP1.4 (8K@30Hz) Input Card COEX controller — angle view
NovaStar MX_2xDP1.4 (8K@30Hz) Input Card COEX controller — detail view

NovaStar MX_2xDP1.4 (8K@30Hz) Input Card COEX LED Controller

$3,688.00

  • Product role: Source-ingest card; it occupies one MX input slot.
  • Host chassis: NovaStar MX2000 Pro or MX6000 Pro only, with a compatible IN slot and matched versions.
  • Source inputs: 2 × DP 1.4
  • Confirmed source mode: 7680 × 4320@30 Hz forced per documented DP input
  • Format / operating boundary: HDR10/HLG, custom resolutions and HDCP 2.3 backward compatibility are documented; interlaced input is not supported.
  • Cable planning: NovaStar documents DP 1.4 cable paths up to 5 m.

Message us before you order and we'll confirm live stock, make sure it fits your exact system, and get you volume pricing below the listed price. Over $2M in NovaStar inventory in our Florida warehouse; most in-stock orders ship same-day.

SKU: MX_2xDP1.4 (8K@30Hz) Input Card Category:
Free US ShippingFree ground shipping, continental US
Same-Day DispatchOrder by 3 PM ET on in-stock items
3-Year WarrantySerial-tracked manufacturer coverage
Authorized US ChannelGenuine NovaStar, not gray-market

What is the NovaStar MX_2xDP1.4 Input Card for?

Choose this card when two independent DP 1.4 graphics or playback sources need to enter one IN slot of NovaStar MX2000 Pro or MX6000 Pro. The signal path is source → input card → MX chassis → output card, receiving cards and LED wall.

It is an input card, not a controller or LED-output expansion: two DP connectors do not create two LED outputs, increase wall pixel capacity or make an unsupported receiving card compatible.

NovaStar MX_2xDP1.4 specifications: two DP inputs at 8K30

Each DP 1.4 input is documented to 7680 × 4320@30 Hz forced. Use the card for two separate high-resolution graphics or playback machines when source density matters more than one DP 8K60 path.

HDR10/HLG, custom resolutions and HDCP 2.3 backward compatibility are documented; interlaced input is not supported. NovaStar documents DP 1.4 cable paths up to 5 m.

Can MX_2xDP1.4 fit your MX2000 Pro or MX6000 Pro source plan?

Yes, when an IN slot is available and the host, input-card model, slot number and firmware match the VMP project. MX2000 Pro has two input-card slots and MX6000 Pro has eight; this dual-input card uses one slot while the output-card and screen map remain separate decisions.

How two DP sources reach the LED wall through an MX chassis

Two DP workstations or playback engines can stay independent at the input stage for VMP layer assignment before they continue through the MX chassis to the output-card and receiving-card path. Verify both forced 8K30 modes and the two 5 m DP routes; an “8K” label alone is not a source-map decision.

The input card consolidates source ingest; it does not decide LED-side capacity or create a second output path.

MX_2xDP1.4 vs MX_4 DP1.2, dual HDMI and the 8K60 DP card

Choose MX_2xDP1.4 for two DP 8K30-class sources. Choose MX_1xDP 1.4 8K60 for one DP source at 60 Hz, dual HDMI for HDMI sources, or MX_4 DP1.2 for four DP 4K60-class feeds. The choice is source count, connector and refresh, not LED output count.

NovaStar MX_2xDP1.4 Input Card Manual, PDF and VMP Software

Use the model-named download page as the starting point, then verify the shared MX6000 Pro V1.5.0 input-card specification, the manual for the actual MX host and the matching VMP project version. Two DP inputs do not create two LED outputs.

PDFMX_2xDP1.4 (8K@30Hz) Input Card datasheetModel-led download page; the official technical source is the shared MX6000 Pro V1.5.0 specification.MANUALMX6000 Pro user manualHost-controller slot and installation instructions. MX2000 Pro users should use that chassis manual in the direct links below.SOFTWAREVMP software and manualCOEX source, project and device management. Match card slot, model and firmware before importing a project.PROTOCOLCOEX central control protocolHost-system RS232/TCP/UDP reference only; it is not a REST API or an input-card configuration guide.

Direct PDF links: MX_2xDP1.4 (8K@30Hz) Input Card download page · Official MX6000 Pro V1.5.0 Specification PDF — shared input-card reference · MX2000 Pro User Manual PDF · VMP User Manual PDF.

MX_2xDP1.4 Input Card buying and commissioning FAQs

Can this card run one DP source at 8K60?

No. Its documented 8K-class mode is 30 Hz. Choose the single DP 1.4 8K60 card for one source at 60 Hz.

Does two DP inputs mean two LED-wall outputs?

No. They are two source inputs on one MX input card; LED outputs depend on the host output architecture.

Can I connect interlaced DP video?

No. Interlaced signal inputs are documented as unsupported.

Which chassis supports this card?

MX2000 Pro and MX6000 Pro only, with an available IN slot and matching software/firmware.

MX_2xDP1.4 Input Card order check

Before requesting a quote, confirm the two DP source modes, the 8K30 versus 8K60 requirement, the cable routes and the MX host slot:

  • List both DP source resolutions and refresh targets
  • Confirm 8K30 rather than 8K60 is the real requirement
  • Confirm an MX IN slot is free
  • Record VMP/host/card versions
  • Plan both DP cable routes

Send us the two DP source formats, required refresh rates, host model and receiving-card or screen plan through our contact page. We can then confirm the correct dual-DP input path before you order.

Reviews

There are no reviews yet.

Be the first to review “NovaStar MX_2xDP1.4 (8K@30Hz) Input Card COEX LED Controller”

Your email address will not be published. Required fields are marked *

Related products

Scroll to Top