The MCTRL700 provides HDMI 1.3 and DVI inputs with matching loop outputs plus six Ethernet outputs. Six 650,000-pixel port ceilings do not make a 3.9M-pixel controller; V1.2.2 limits the complete device to 1920×1200@60Hz, or 2,304,000 pixels.
Need the MCTRL700 itself? See current MCTRL700 price and stock on the product page.
Sizing a new wall? Match pixel capacity and ports in the controller calculator.
MCTRL700 specifications
These values come from the checked manufacturer document. Confirm the source timing, total device load and per-port map together when planning a screen.
| Document | MCTRL700 Specifications V1.2.2 |
|---|---|
| Inputs | 1× HDMI 1.3, 1× single-link DVI, 1× audio |
| Video loops | HDMI OUT and DVI OUT |
| Maximum total load | 1920×1200@60Hz, 2,304,000 pixels |
| LED outputs | 6× Gigabit Ethernet, up to 650,000 pixels per output |
| Control | USB Type-B and UART cascade up to 20 devices |
How to use the MCTRL700 datasheet
Check the source
Match the connector, resolution, refresh rate and bit depth to the signal that will feed the controller.
Check the LED load
Calculate the full canvas and then confirm that every Ethernet output stays within its own loading limit.
Check the control chain
Confirm the receiving cards, software, optical path and any backup method before the equipment list is finalized.
Check installation details
Use the dimensions, power and operating limits when planning the rack, chassis or service environment.