The MCTRL1600 is a high-capacity sending controller and optical-electrical converter with DisplayPort 1.2, four DVI paths, 16 Ethernet outputs and four 10G optical ports. Its capacity depends on the input path: 8.8M pixels by DP, 9.2M across four single-link DVI paths, or 8.3M across two dual-link DVI paths.
MCTRL1600 specifications
These values come from the checked manufacturer document. Confirm the source timing, total device load and per-port map together when planning a screen.
| Document | MCTRL1600 Specifications V1.2.3, Chinese-language |
|---|---|
| Maximum load | DP 8.8M; four SL-DVI paths 9.2M; two DL-DVI paths 8.3M |
| Inputs | 1× DP 1.2 and 4× DVI; DVI 1/2 support dual-link mode |
| LED outputs | 16× Gigabit Ethernet |
| Optical | 4× 10G LC with main and backup/copy paths |
| Power / rack | 100–240 VAC, 30 W; 2U |
How to use the MCTRL1600 datasheet
Check the source
Match the connector, resolution, refresh rate and bit depth to the signal that will feed the controller.
Check the LED load
Calculate the full canvas and then confirm that every Ethernet output stays within its own loading limit.
Check the control chain
Confirm the receiving cards, software, optical path and any backup method before the equipment list is finalized.
Check installation details
Use the dimensions, power and operating limits when planning the rack, chassis or service environment.