Use this exact-model manual for DP and DVI input modes, sending-card and fiber-converter operation, Ethernet and optical mapping, backup modes, 3D and device setup. The verified V1.2.3 document is Chinese-language, which must be stated beside the download button.
This is the exact-model MCTRL1600 User Manual V1.2.3. The verified document is in Chinese.
What the MCTRL1600 setup manual covers
Screen connection
Connect the controller or sending card to the computer, receiving cards and LED cabinets in the correct order.
Cabinet configuration
Load or create the receiving-card file, set cabinet dimensions and confirm the data path before mapping the full screen.
Screen mapping
Assign cabinets to Ethernet outputs, check the connection order and save the finished configuration to the hardware.
Checks and troubleshooting
Confirm communication, source timing and saved settings before the system is installed or returned to service.
MCTRL1600 setup sequence
Check the hardware
Use the datasheet to confirm input format, output count, power and capacity before opening the software.
Connect the control computer
Use the documented USB or network control path and confirm that the device appears in NovaLCT.
Configure one cabinet first
Load a known receiving-card file or complete Smart Setting, then test one cabinet before mapping the wall.
Map and save the screen
Build the cabinet connection map, send it to the hardware and save a backup of the working configuration.
MCTRL1600 specifications and limits
Use the specifications table for hardware limits. The manual explains the setup process; it does not replace the model datasheet.
| Document | MCTRL1600 Specifications V1.2.3, Chinese-language |
|---|---|
| Maximum load | DP 8.8M; four SL-DVI paths 9.2M; two DL-DVI paths 8.3M |
| Inputs | 1× DP 1.2 and 4× DVI; DVI 1/2 support dual-link mode |
| LED outputs | 16× Gigabit Ethernet |
| Optical | 4× 10G LC with main and backup/copy paths |
| Power / rack | 100–240 VAC, 30 W; 2U |