The MSD600 is an internal four-output sending card for a confirmed chassis and 3.3–5.5V DC supply. Its largest documented 8-bit source is 1920×1200@60Hz, or 2,304,000 pixels; adding four 650,000-pixel port ceilings does not create a documented 2.6M input canvas.
Need the MSD600 itself? See current MSD600 price and stock on the product page.
Sizing a new wall? Match pixel capacity and ports in the controller calculator.
MSD600 specifications
These values come from the checked manufacturer document. Confirm the source timing, total device load and per-port map together when planning a screen.
| Document | MSD600 Sending Card Specifications V2.4.1 |
|---|---|
| Inputs | 1× single-link DVI, 1× HDMI 1.3, 1× audio |
| 8-bit maximum | 1920×1200@60Hz |
| 10/12-bit maximum | 1440×900@60Hz |
| LED outputs | 4× Gigabit Ethernet, 650,000 pixels per output |
| Power / dimensions | 3.3–5.5V DC, 6.6 W; 137.9×99.7×39.0 mm |
How to use the MSD600 datasheet
Check the source
Match the connector, resolution, refresh rate and bit depth to the signal that will feed the controller.
Check the LED load
Calculate the full canvas and then confirm that every Ethernet output stays within its own loading limit.
Check the control chain
Confirm the receiving cards, software, optical path and any backup method before the equipment list is finalized.
Check installation details
Use the dimensions, power and operating limits when planning the rack, chassis or service environment.