The MSD600-1 is an internal DVI and HDMI sending card for a host that has been checked for this exact board, its connectors and 3.3–5.5V DC power. The documented 8-bit source limit is 1920×1200@60Hz, not a blanket 2.6M-pixel canvas.
Need the MSD600-1 itself? See current MSD600-1 price and stock on the product page.
Sizing a new wall? Match pixel capacity and ports in the controller calculator.
MSD600-1 specifications
These values come from the checked manufacturer document. Confirm the source timing, total device load and per-port map together when planning a screen.
| Document | MSD600-1 Sending Card Specifications V1.0.1 |
|---|---|
| Inputs | 1× single-link DVI and 1× HDMI 1.3; no separate audio connector listed |
| 8-bit maximum | 1920×1200@60Hz |
| 10/12-bit maximum | 1440×900@60Hz |
| LED outputs | 4× Gigabit Ethernet, 650,000 pixels per output |
| Power / dimensions | 3.3–5.5V DC, 6.6 W; 151.0×121.0×42.0 mm |
How to use the MSD600-1 datasheet
Check the source
Match the connector, resolution, refresh rate and bit depth to the signal that will feed the controller.
Check the LED load
Calculate the full canvas and then confirm that every Ethernet output stays within its own loading limit.
Check the control chain
Confirm the receiving cards, software, optical path and any backup method before the equipment list is finalized.
Check installation details
Use the dimensions, power and operating limits when planning the rack, chassis or service environment.