The MSD300 is a bare internal sending card for a confirmed host and regulated 3.3–5.5V DC supply. Its 1920×1200 value describes the accepted source timing, while the LED wall is limited to 1.3 million pixels total and 650,000 pixels on each of two outputs.
Need the MSD300 itself? See current MSD300 price and stock on the product page.
Sizing a new wall? Match pixel capacity and ports in the controller calculator.
MSD300 specifications
These values come from the checked manufacturer document. Confirm the source timing, total device load and per-port map together when planning a screen.
| Document | MSD300 Sending Card Specifications V2.4.2 |
|---|---|
| Video | 1× single-link DVI plus separate audio |
| Source timing | Up to 1920×1200@60Hz; 8-bit RGB 4:4:4 |
| LED load | 1.3 million pixels total; 650,000 pixels per output |
| LED outputs | 2× Gigabit Ethernet |
| Power / dimensions | 3.3–5.5V DC, 3 W; 130.1×99.7×14.0 mm |
How to use the MSD300 datasheet
Check the source
Match the connector, resolution, refresh rate and bit depth to the signal that will feed the controller.
Check the LED load
Calculate the full canvas and then confirm that every Ethernet output stays within its own loading limit.
Check the control chain
Confirm the receiving cards, software, optical path and any backup method before the equipment list is finalized.
Check installation details
Use the dimensions, power and operating limits when planning the rack, chassis or service environment.