The MCTRL660 Pro accepts 3G-SDI, HDMI 1.4a or DVI, provides loop-through on all three source types, and sends through six Ethernet outputs or a main/backup 10G optical pair. It can also work as a fiber converter and synchronize to Genlock.
Need the MCTRL660 Pro itself? See current MCTRL660 Pro price and stock on the product page.
Sizing a new wall? Match pixel capacity and ports in the controller calculator.
MCTRL660 Pro specifications
These values come from the checked manufacturer document. Confirm the source timing, total device load and per-port map together when planning a screen.
| Document | MCTRL660 Pro Specifications V1.4.1 |
|---|---|
| Inputs | 3G-SDI, HDMI 1.4a and single-link DVI, each with loop-through |
| 8-bit maximum | 1920×1200@60Hz |
| 10/12-bit HDMI/DVI | Up to 1920×1080@60Hz |
| LED outputs | 6× Gigabit Ethernet |
| Optical / sync | 2× 10G main/backup; Genlock IN/LOOP |
How to use the MCTRL660 Pro datasheet
Check the source
Match the connector, resolution, refresh rate and bit depth to the signal that will feed the controller.
Check the LED load
Calculate the full canvas and then confirm that every Ethernet output stays within its own loading limit.
Check the control chain
Confirm the receiving cards, software, optical path and any backup method before the equipment list is finalized.
Check installation details
Use the dimensions, power and operating limits when planning the rack, chassis or service environment.