The MCTRL660 is a four-output HDMI 1.3 and DVI sending controller with matching video loop outputs. Its complete 8-bit canvas is limited to 1920×1200@60Hz, while 10/12-bit input is limited to 1440×900@60Hz.
Need the MCTRL660 itself? See current MCTRL660 price and stock on the product page.
Sizing a new wall? Match pixel capacity and ports in the controller calculator.
MCTRL660 specifications
These values come from the checked manufacturer document. Confirm the source timing, total device load and per-port map together when planning a screen.
| Document | MCTRL660 Specifications V1.4.4 |
|---|---|
| Inputs | 1× HDMI 1.3, 1× single-link DVI, 1× audio |
| Video loops | HDMI OUT and DVI OUT |
| 8-bit maximum | 1920×1200@60Hz, 2,304,000 pixels |
| 10/12-bit maximum | 1440×900@60Hz |
| LED outputs | 4× Gigabit Ethernet, up to 650,000 pixels per output |
How to use the MCTRL660 datasheet
Check the source
Match the connector, resolution, refresh rate and bit depth to the signal that will feed the controller.
Check the LED load
Calculate the full canvas and then confirm that every Ethernet output stays within its own loading limit.
Check the control chain
Confirm the receiving cards, software, optical path and any backup method before the equipment list is finalized.
Check installation details
Use the dimensions, power and operating limits when planning the rack, chassis or service environment.