The MCTRL600 sends one prepared HDMI 1.3 or single-link DVI canvas through four Ethernet outputs. The current document limits the 8-bit source to 1920×1200@60Hz and 10/12-bit sources to 1440×900@60Hz; four port ceilings must not be added and advertised as a 2.6M canvas.
Need the MCTRL600 itself? See current MCTRL600 price and stock on the product page.
Sizing a new wall? Match pixel capacity and ports in the controller calculator.
MCTRL600 specifications
These values come from the checked manufacturer document. Confirm the source timing, total device load and per-port map together when planning a screen.
| Document | MCTRL600 Specifications V2.3.5 |
|---|---|
| Inputs | 1× single-link DVI, 1× HDMI 1.3, 1× audio |
| 8-bit maximum | 1920×1200@60Hz |
| 10/12-bit maximum | 1440×900@60Hz |
| LED outputs | 4× Gigabit Ethernet, up to 650,000 pixels per output |
| Power / rack | 100–240 VAC, 6.6 W; 1U |
How to use the MCTRL600 datasheet
Check the source
Match the connector, resolution, refresh rate and bit depth to the signal that will feed the controller.
Check the LED load
Calculate the full canvas and then confirm that every Ethernet output stays within its own loading limit.
Check the control chain
Confirm the receiving cards, software, optical path and any backup method before the equipment list is finalized.
Check installation details
Use the dimensions, power and operating limits when planning the rack, chassis or service environment.