The MCTRL510 is a legacy DVI sending controller intended mainly for maintaining a known installation. It provides four Ethernet outputs or four optical outputs and supports 2048×1152 or 1920×1200; its separate 100Mbps TCP/IP port is for computer control, not LED data.
Need the MCTRL510 itself? See current MCTRL510 price and stock on the product page.
Sizing a new wall? Match pixel capacity and ports in the controller calculator.
MCTRL510 specifications
These values come from the checked manufacturer document. Confirm the source timing, total device load and per-port map together when planning a screen.
| Document | Controller MCTRL510 Specifications V1.0.0 |
|---|---|
| Video | 1× DVI IN and 1× DVI loop/monitor OUT |
| Maximum resolution | 2048×1152 or 1920×1200 |
| LED output paths | 4× Ethernet or 4× optical |
| PC communication | 100Mbps TCP/IP; documented device address 192.168.11.2 |
| Power / rack | 100–240 VAC, 16 W; 19-inch 1U |
How to use the MCTRL510 datasheet
Check the source
Match the connector, resolution, refresh rate and bit depth to the signal that will feed the controller.
Check the LED load
Calculate the full canvas and then confirm that every Ethernet output stays within its own loading limit.
Check the control chain
Confirm the receiving cards, software, optical path and any backup method before the equipment list is finalized.
Check installation details
Use the dimensions, power and operating limits when planning the rack, chassis or service environment.