The MCTRL300 is a compact external sending controller for one prepared single-link DVI source. It sends up to 1.3 million pixels through two Ethernet outputs, with a separate 650,000-pixel ceiling on each output; redundancy does not double that capacity.
Need the MCTRL300 itself? See current MCTRL300 price and stock on the product page.
Sizing a new wall? Match pixel capacity and ports in the controller calculator.
MCTRL300 specifications
These values come from the checked manufacturer document. Confirm the source timing, total device load and per-port map together when planning a screen.
| Document | MCTRL300 Specifications V2.4.1 |
|---|---|
| Video input | 1× single-link DVI, 8-bit RGB 4:4:4 |
| Maximum input | 1920×1200@60Hz; custom examples 3840×600 and 548×3840 |
| LED outputs | 2× Gigabit Ethernet |
| Loading | 1.3 million pixels total; 650,000 pixels per output |
| Power / dimensions | 100–240 VAC, 3 W; 204×160×48 mm |
How to use the MCTRL300 datasheet
Check the source
Match the connector, resolution, refresh rate and bit depth to the signal that will feed the controller.
Check the LED load
Calculate the full canvas and then confirm that every Ethernet output stays within its own loading limit.
Check the control chain
Confirm the receiving cards, software, optical path and any backup method before the equipment list is finalized.
Check installation details
Use the dimensions, power and operating limits when planning the rack, chassis or service environment.