Use this exact-model manual for the R5 front-panel menus, input and output setup, screen configuration, rotation workflow, backup settings and cascading. Rotation must be planned with compatible receiving cards, SmartLCT and an 8-bit source.
Need the MCTRL R5 User Manual Download: PDF, Setup & Configuration itself? See current MCTRL R5 User Manual Download: PDF, Setup & Configuration price and stock on the product page.
Sizing a new wall? Match pixel capacity and ports in the controller calculator.
This is the exact-model MCTRL R5 User Manual V1.0.5.
What the MCTRL R5 setup manual covers
Screen connection
Connect the controller or sending card to the computer, receiving cards and LED cabinets in the correct order.
Cabinet configuration
Load or create the receiving-card file, set cabinet dimensions and confirm the data path before mapping the full screen.
Screen mapping
Assign cabinets to Ethernet outputs, check the connection order and save the finished configuration to the hardware.
Checks and troubleshooting
Confirm communication, source timing and saved settings before the system is installed or returned to service.
MCTRL R5 setup sequence
Check the hardware
Use the datasheet to confirm input format, output count, power and capacity before opening the software.
Connect the control computer
Use the documented USB or network control path and confirm that the device appears in NovaLCT.
Configure one cabinet first
Load a known receiving-card file or complete Smart Setting, then test one cabinet before mapping the wall.
Map and save the screen
Build the cabinet connection map, send it to the hardware and save a backup of the working configuration.
MCTRL R5 specifications and limits
Use the specifications table for hardware limits. The manual explains the setup process; it does not replace the model datasheet.
| Document | MCTRL R5 Specifications V1.0.5 |
|---|---|
| Maximum load | 3840×1080@60Hz, about 4.15 million pixels |
| Inputs | 1× 6G-SDI, 1× HDMI 1.4, 1× dual-link DVI |
| LED outputs | 8× Gigabit Ethernet and 2× 10G optical |
| Rotation | Any angle with A8s or A10s Pro receiving cards and SmartLCT; 8-bit input required |
| Cascade | Up to 8 devices |