The MSD300-1 is an internal sending card with classic PCI gold fingers, but video enters through DVI and NovaLCT control uses USB Type-B. The card needs a confirmed 3.3–5.5V DC power arrangement and loads up to 1.3 million LED pixels across two Ethernet outputs.
Need the MSD300-1 itself? See current MSD300-1 price and stock on the product page.
Sizing a new wall? Match pixel capacity and ports in the controller calculator.
MSD300-1 specifications
These values come from the checked manufacturer document. Confirm the source timing, total device load and per-port map together when planning a screen.
| Document | MSD300-1 Sending Card Specifications V1.1.0 |
|---|---|
| Host form | Classic PCI gold fingers; do not assume universal slot power or data |
| Video / control | 1× single-link DVI; USB Type-B |
| LED load | 1.3 million pixels total; 650,000 pixels per output |
| LED outputs | 2× Gigabit Ethernet |
| Power / dimensions | 3.3–5.5V DC, 3 W; 138.8×120.6×22.0 mm |
How to use the MSD300-1 datasheet
Check the source
Match the connector, resolution, refresh rate and bit depth to the signal that will feed the controller.
Check the LED load
Calculate the full canvas and then confirm that every Ethernet output stays within its own loading limit.
Check the control chain
Confirm the receiving cards, software, optical path and any backup method before the equipment list is finalized.
Check installation details
Use the dimensions, power and operating limits when planning the rack, chassis or service environment.