The MCTRL500 accepts one prepared single-link DVI source and sends the same four output groups over copper or one-to-one 1.25G optical ports. Its accepted canvas is limited to 1920×1200@60Hz, even though each of the four Ethernet outputs has its own 650,000-pixel ceiling.
Need the MCTRL500 itself? See current MCTRL500 price and stock on the product page.
Sizing a new wall? Match pixel capacity and ports in the controller calculator.
MCTRL500 specifications
These values come from the checked manufacturer document. Confirm the source timing, total device load and per-port map together when planning a screen.
| Document | MCTRL500 Specifications V2.3.2 |
|---|---|
| Input | 1× single-link DVI; 8-bit up to 1920×1200@60Hz |
| High bit depth | 10/12-bit up to 1440×900@60Hz |
| LED outputs | 4× Gigabit Ethernet plus 4× one-to-one 1.25G optical |
| Per-port load | 650,000 pixels |
| Fiber distance | Up to 300 m multimode or 10 km single-mode with the documented optical path |
How to use the MCTRL500 datasheet
Check the source
Match the connector, resolution, refresh rate and bit depth to the signal that will feed the controller.
Check the LED load
Calculate the full canvas and then confirm that every Ethernet output stays within its own loading limit.
Check the control chain
Confirm the receiving cards, software, optical path and any backup method before the equipment list is finalized.
Check installation details
Use the dimensions, power and operating limits when planning the rack, chassis or service environment.