The MCTRL4K maps one prepared HDMI 2.0, DisplayPort 1.2 or dual-link DVI canvas across 16 Ethernet outputs. HDMI or DP can load up to 8.8 million pixels, and four 10G optical ports provide two main output groups plus two matching backup paths.
Need the MCTRL4K itself? See current MCTRL4K price and stock on the product page.
Sizing a new wall? Match pixel capacity and ports in the controller calculator.
MCTRL4K specifications
These values come from the checked manufacturer document. Confirm the source timing, total device load and per-port map together when planning a screen.
| Document | MCTRL4K Specifications V1.2.1 |
|---|---|
| Inputs | 1× DP 1.2, 1× HDMI 2.0, 2× dual-link DVI |
| DP/HDMI load | Up to 8,800,000 pixels; 4096×2160@60Hz |
| DVI load | Up to 8,300,000 pixels |
| LED outputs | 16× Gigabit Ethernet |
| Optical | 4× 10G: two main groups and two matching backup groups |
How to use the MCTRL4K datasheet
Check the source
Match the connector, resolution, refresh rate and bit depth to the signal that will feed the controller.
Check the LED load
Calculate the full canvas and then confirm that every Ethernet output stays within its own loading limit.
Check the control chain
Confirm the receiving cards, software, optical path and any backup method before the equipment list is finalized.
Check installation details
Use the dimensions, power and operating limits when planning the rack, chassis or service environment.